#PL23XX USB TO SERIAL SERIAL#
#PL23XX USB TO SERIAL DRIVERS#

It should find it automatically and start the firmware loading. 3.3 in my case) and leave Auto-detect COM port checked. Set the COM port to the value indicated in the name and the result should be 'This is a PL-2303 SA chip'. You can confirm this by running PL23XX_checkChipVersion_v1020.exe in the unzipped files. The 'USB-Serial Controller D' has been transformed to 'Prolific USB-to-Serial Comm Port (COMx)' where COMx is the virtual COM port where the device is now listening. When it's finished look at Device Manager again.

#PL23XX USB TO SERIAL SERIAL#

Product information USB 2.0 to Serial adapter from LogiLink This compact. Download it, check it for viruses (my AVG Free found none), then unzip it somewhere. 364.00 KB The current web page applies to PL23XX USB-to-Serial version 2.0.0 only. Clicking on it should take you to a download page for PL23XX_Prolific_DriverInstaller_v204.zip. A simple Python GUI program to view APRS data from radio via serial. You'll see a link for 'PL2303 Windows Driver Download USB to UART RS232 Serial' at . The Arduino and packet TNC were both connected to my laptop computer on the USB ports. The host then tries to find a driver for this but it cannot. This string is how the USB device identifies itself to the host. The FT232R adds two new functions compared with its predecessors, effectively making it a 3-in-1 chip for some application areas. Click the Details tab and select the Hardware Ids property. USB to serial designs using the FT232R have been further simplified by fully integrating the external EEPROM, clock circuit and USB resistors onto the device. USB da placa o padro do Arduino Nano (CH340 ou PL23xx).

#PL23XX USB TO SERIAL DRIVERS#

Under the General tab in the default status windows you'll see 'The drivers for this device are not installed. So I have my GPS module working through a software serial so I can monitor the. Right click on it and select Properties. You'll notice it has a yellow triangle beside it. Go to Device Manager and under 'Other devices' you should see one named 'USB-Serial Controller D'. Fortunately this is easily corrected without their 'support'. The reason the firmware loader can't find the device is because they haven't supplied the needed virtual COM port driver for the USB chip in the HC. Unfortunately Sky Watcher has left its customers in the dark with respect to the newer HC updates.

Pl23xx usb to serial